-
All sections present an
exceptionally clean and flush
exterior surface when closed with only ⅛" gap between glass sections.
-
Vent and exit sections utilize a
hidden hinge design
maintaining a flush automotive look.
-
All outside glass edges have a
full “pencil” edge for
safety and appearance.
-
4" radius for all outside glass corners enhances the
modern automotive look.
-
Vent section has an
easily removable bug screen and is
operated using a custom built, low-backlash scissor operator with the vent
opening limited to approximately four inches at the bottom.
-
Polyurethane bonding technology is used to bond the
stationary glass to the window frame eliminating the potential for leaks
and squeaks.
-
No obtrusive outer frames are used in the emergency exit
models.
-
Emergency exit models have a full 17"H x 24"W opening and
swing a full 90° providing a completely unobstructed opening.
-
No additional costs for installation tools or techniques
since standard clamp rings are used in the installation.
-
Uses a 1/2 thick Insulated glass panel. This system
utilizes a double moisture seal barrier to survive in the changing
conditions.
